LABELING
Fully automatic labeling machine for self-adhesive labels
Technical data:
| Performance: | up to 1,800 bottles/hour Labeling |
|---|---|
| up to 1,200 bottles/hour with capsule roller | |
| up to 1,800 bottles/hour with capsule shrinker | |
| Label roll diameter outside: | max. 250 mm |
| Label Core diameter inside: | 70 - 80 mm |
| Connected load: | 400 V - 50 Hz - 1.5 kW |
| Air requirement: | 6 bar 50 NL/min. without capsule processing |
| Dimensions (lxwxh): | 2,300 x 1,200 x 1,800 mm |
| Weight: | approx. 300 kg |
Structure and drive:
- Basic machine equipped for 1 label on cylindrical bottles
- Expandable to max. 3 labeling stations
- If the machine is initially designed as a pure labeling machine, the bottles are separated using a cycle finger,
- If the machine is equipped with capsule processing, the bottles are separated and guided by an infeed screw.
- Drive of the labeling station, the conveyor belt and, if necessary, the infeed screw via separate motors
- 1 Labeling station with stepper motor
- Cover of the base frame, side panels and belt box made of V2A stainless steel
- Machine on calotte feet, belt height adjustable from 900 - 1000 mm
- CE-compliant control panel on the base frame
- Plexiglas protective cladding
Bottle guide:
- Belt box 100 x 135, with transport chain
- Infeed screw or indexing finger
- Transporting the bottles from left to right
- Bottle collection table 600 x 400 mm
Possible accessories:
- Station for back label
- Processing belly and back label from 1 roll
- Function 3 Labels from 2 stations
- Station for medallion or neck ring
- Front label on square bottles (only possible without capsule processing)
- Accessory set for conical bottles
- Roll-on kit for mignon bottles
- Orientation according to bottom notch, side notch, label or capsule
- Capsule dispenser with storage table
- Capsule shrink fit with air injection
- Capsule roller
- Thermal transfer printer
- Inkjet printer
- PLC control with touch screen monitor
