LABELING
Fully automatic machine for labeling cylindrical bottles and cans with self-adhesive labels
The ENOS KAPPA is suitable for equipping cylindrical bottles with capsules and labeling at up to 3 labeling stations.
The bottles can be equipped with a shrink or roll-on capsule, front and back label (also from a roll), neck ring, neck loop, premium point, control strip or closure protection, also in L-shape. A labeling station with adjustable inclination can be set up for labeling in the shoulder area of the bottles. With the appropriate accessories, the machine can also be used to label conical bottles and mignon bottles.
With an output of up to 2,200 bph, the machine is particularly suitable for medium-sized businesses. A PLC control with touch screen simplifies the operation of the machine and allows the installation of an inverter on the drive roller to increase the speed to 2,800 bph.
Thanks to the 60 x 40 cm bottle collection table, the labeling machine can be set up as a stand-alone machine or integrated into a line if required.
The machine offers the option of integrating a printing system for batch numbers.
Technical data:
| Performance: | up to 2,500 bottles/hour Labeling |
|---|---|
| up to 1,200 bottles/hour with capsule roller | |
| up to 2,200 bottles/hour with capsule shrinker | |
| up to 1,500 bph with L control strips | |
| Label roll diameter outside: | max. 250 mm |
| Label Core diameter inside: | 70 - 80 mm |
| Connected load: | 400 V - 50 Hz - 1.5 kW |
| Air requirement: | 6 bar 50 NL/min. without capsule processing |
| Dimensions (lxwxh): | 2,300 x 1,200 x 1,800 mm |
| Weight: | approx. 300 kg |
Structure and drive:
- Basic machine equipped for 1 label
- Expandable to max. 3 labeling stations
- The labeling station, conveyor belt and infeed auger are driven by separate motors
- 1 Labeling station with stepper motor
- Cover of the base frame, side panels and belt box made of V2A stainless steel
- Supplied on spherical feet, belt height adjustable from 900 - 1000 mm
- CE-compliant control panel on the base frame
- Plexiglas protective cladding
Bottle guide:
- Belt box 100 x 135, with transport chain
- Inlet screw
- Transporting the bottles from left to right
- Bottle collection table 600 mm long
Possible accessories:
- Station for back label
- Processing belly and back label from 1 roll
- Function 3 Labels from 2 stations
- Station for neck loop or premium point with adjustment device
- Station for L-shaped sealing or control strips (only possible without capsule processing)
- Station for labels with integrated locking device (only possible without capsule processing)
- Accessory set for conical bottles
- Roll-on kit for mignon bottles
- Orientation according to bottom notch, side notch, label or capsule
- Capsule dispenser with storage table, also available with needle separation
- Capsule shrink fit with air injection
- Capsule roller
- Thermal transfer printer
- Inkjet printer
- PLC control with touch screen monitor
